Clear Bra Film Near Me: Understanding the Clear Bra Installation Process

Unique Films Tint & Detail Center Blogger • Jun 21, 2023

Are you looking for "clear bra film near me?" If so, you might want to understand the clear bra installation process first. Find out more here.

Do you own a car, or a business owner with a fleet of vehicles? Having a car on the road every day exposes it to the elements. So much so you may be wondering if you need paint protection film (PPF).

For individuals concerned about the environmental impact and damage caused by the elements, you should consider installing a clear bra. To find a clear bra installer, simply Google "clear bra film near me."

Clear bra for cars is a transparent, urethane-based film that protects your vehicle's paint job from daily wear. It works as a protective barrier, protecting your car's paint from scratches, chip marks, and even sun damage.

But how do you install a clear bra? And why is this a task best left to the experts? We're here to answer all your questions.

Locating Clear Bra Film Near Me

Clear bra installation is a complex process that should only be done by experienced technicians specializing in this type of work. If you're unsure if you want to install a clear bra on your car or truck, reading up on the professional installation process might help you decide.

It's worth searching for a clear bra installer and asking questions about the process.

Installing Clear Bra Yourself

The installation process of the clear bra will vary depending on the PPF coverage of your car. Before purchasing the film, you'll need to know where you want the film to be installed.

For example, do you expect to cover the entire vehicle, headlights, front grill, or just the hood? Depending on your decision, expect a professional installation to take a few hours to a few days. As an amateur, the installation time can increase drastically.

Regarding PPF, one of the most important things to remember is that your workspace should be no higher than 75 degrees Fahrenheit. You want as little humidity as possible and no wind gusts. Avoid installing a clear bra in cold weather or when it's raining.

It's strongly recommended that vehicle owners not try installing clear bra film. It's not a DIY project to undertake. Clear bra installation is a complex process that should only be done by experts.

If you're expecting the best results, always hire a professional.

Clear Bra Installation Process

Before you apply clear bra paint protection, make sure you have the following items:

clean, non-tarnish towel
hair dryer
heat gun
shampoo solution
spray bottle
squeegee
steamer

Start by washing the entire exterior surface of the vehicle. You may need to use ferrous sulfate removers to get rid of embedded iron impurities from the paint pores.

If the vehicle is not thoroughly cleaned, dried, and particles-free, you may have a less-than-perfect result. By not thoroughly cleaning the car, bubbles and wrinkles can appear in the film. In the worst-case scenario, you may damage your car's paint.

Step 2

This step is optional but recommended. Car owners should consider waxing their vehicles before installation. Following this process will make it much easier to remove the film in the future. In addition, waxing the finish could help protect the paint's overall finish.

Ensure the surface where you used the wax has been evenly buffed before moving on to the next steps.

Step 3

Now it's time to apply the film. Begin the process with a solution of water and shampoo. You only need a small portion of shampoo. Adding more shampoo before installation will not improve the solution or simplify the process.

The opposite can happen. You may cause problems down the line if the solution becomes too acidic. It is best to use baby shampoo.

Begin by spraying your soap solution onto your car's surface, where you install clear bra film. It would help if you sprayed it on your hands so that you don't mess with the adhesive side of your film.

Next, begin positioning the clear bra for cars onto the designated areas. Be sure not to fold the clear bra over other pieces. By doing so, the adhesive side will stick to itself!

For areas that need large pieces, such as the edge of your hood, it is a good idea to have tools nearby to help you handle the films.

Step 4

Once the clear bra paint protection film has been installed on the car, it's time to remove the bubbles. If any areas feel like they aren't sticking to the car, peel off the edge of the film and spray more soap solution on the spot.

Spray a second layer of soap solution over the clear bra film to act as a lubricant.

Once you're happy with how you've placed placement the film on your vehicle, use your squeegee to remove the bubbles. Begin smoothing out the film in the middle and pressing down hard to remove all water and moisture.

It's common to not be happy with the results of the squeegee trick. On some surfaces, there are still bubbles left. Try using a heat gun or hairdryer.

Remove all water and moisture between the paint and film. Ensure it adheres properly and provides a clean finish.

It's vital that no water or moisture remains. Moisture under the film can cause damage to the paint in the long term.

Allow the film to dry. It may take some time and is dependent on the climate where the vehicle is located.

Leave It to the Pros

Our guide for a clear bra installation isn't meant to scare you. The process is time-consuming and tedious. One mistake can ruin the entire job.

Choosing a company with a team of professionals that are highly skilled in installing clear bra for cars is strongly recommended. If you're in the Birmingham area and wondering if there's an installer of clear bra film near me, look no further than Unique Films Tint & Detail Center.

Click here to schedule an appointment with our team to get your free estimate.

< Older Post Newer Post >